Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Design advice for AAA thru PIX

Customer need to implement AAA thru PIX,

goal is to Authentified clients from Raduis Server and also

authorized these clients to use or no some TCP ports

do i need to configure some Virtual Address on PIX in

order to achieve that ? i'm really confused how configuration

on PIX for this type of Authentication/Autorization

can somebody already worked on this type of configuration ?

thanks in advance for any help

JYP

2 REPLIES
New Member

Re: Design advice for AAA thru PIX

Hi,

You need to enable authentication and authorization on the pix . Here is a good link which explains the basic confg.

http://www.cisco.com/warp/public/110/atp52.html

Thanks

Sujit

Silver

Re: Design advice for AAA thru PIX

Hi,

The concept you are referring is called virtual http/telnet. Its not required to configured virual address under normal circumstance. This is required when you have double authentication for web server or integrade AAA server with SDI sofwtare (new pin mode etc). Pl. follow the previous post link to configure authen/autho and lets know if you have any confusion.

Thanks,

Mynul

140
Views
0
Helpful
2
Replies
CreatePlease to create content