Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Did configuring Peap in ACS break my tacacs logins?

So i just set up peap (certs and eap-tls) on ACS 4.0. However since then i cannot log into my routers anymore. I see the passed authentication on the ACS logs, but the router still tells me it's a failed authentication. I have a local username and password, but those all of the sudden stopped working too. If i reboot the ACS server i can then log into my routers while it's down. Once it comes back up, authentication fails again...ideas?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Did configuring Peap in ACS break my tacacs logins?

This is a know issue, Workaround is to disable the remote logging functionality altogether.

Bug has been raised for this issue,

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCeg40355

CSCeg40355 Bug Details

Authentication failures when remote logging fails.

Regards,

~JG

Do rate helpful posts

1 REPLY

Re: Did configuring Peap in ACS break my tacacs logins?

This is a know issue, Workaround is to disable the remote logging functionality altogether.

Bug has been raised for this issue,

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCeg40355

CSCeg40355 Bug Details

Authentication failures when remote logging fails.

Regards,

~JG

Do rate helpful posts

159
Views
0
Helpful
1
Replies
CreatePlease to create content