I have enabled the Dot1x Authentication on a Switch Port in a Cisco 4500 Switch running Cisco IOS Release 12.2(50)SG6.bin.I have configured the Dot1x Configuration.When i give show authentication sessions in fa 6/38 i get the output but without the dynamic ACL for eg Per-User ACL: permit ip any any.
The same i tried on Cisco 6500 Switch running 122-33.SXI3.bin image and get the output with ACL applied.
Is there any image specification which causing this issue.The Per-User ACL: output is missing on Cisco 4500 Switch running 12.2(50)SG6.bin.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...