Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

dot1x from catalyst 2960 to rsa

My infrastructure:

- Windows Vista or XP PC

- Catalyst 2960

- RSA Authentication Manager 7.1 with radius server

I'm trying to authenticate my clients through RSA secureid but it doesn't work...

If I try radius authentication with a test client it works properly...

My switch is configured (interesting parts):

aaa authentication dot1x default group radius

dot1x system-auth-control

interface GigabitEthernet0/4

dot1x pae authenticator

dot1x port-control auto

radius-server host 10.242.5.63 auth-port 1645 acct-port 1646 key 7 <removed>

radius-server source-ports 1645-1646

I've read some documents about this, and I've tried all tyoe of authentication, I think that correct auth is Cisco PEAP-GTC

Anyone has a working configuration?

Thanks

Daniele

1 REPLY

Re: dot1x from catalyst 2960 to rsa

With RSA you need to set GTC and no other authentication protocol will work.

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs32/user02/o.htm#wp623530

Regards,

~JG

Do rate helpful posts

330
Views
0
Helpful
1
Replies