Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

downgrade ACS 5.3 to 5.2

Hi,

I want to downgrade an acs acs 5.3 to 5.2 - I have looked through the documentation, but somehow I fail to find the exact commands for the downgrade.

Previously I just used the recovery cd to reinstall the image, but  it must be possible to do a downgrade without loosing all the configuration..

can anybody help me out  ?

Thanks in advance!

Everyone's tags (6)
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

downgrade ACS 5.3 to 5.2

Hi ,

You will keep recieving application error if you want to use " application upgrade" command , you need to use ISO DVD to do the downgrade.

HTH

5 REPLIES
New Member

downgrade ACS 5.3 to 5.2

Hi ,

You will keep recieving application error if you want to use " application upgrade" command , you need to use ISO DVD to do the downgrade.

HTH

downgrade ACS 5.3 to 5.2

Hussam,

Are you sure about this? Everywhere i look there is no reference to this. There are some conversations that say this cant be done and that you have to reimage. I know you can remove patches but I havent heard anything else.

Thanks,

Tarik Admani
*Please rate helpful posts*

Tarik Admani *Please rate helpful posts*
New Member

downgrade ACS 5.3 to 5.2

Tarik,

Yes no reference , i 've done that in lab environment

Re: downgrade ACS 5.3 to 5.2

Can you please check to see if this is supported? I thought that most version upgrades involved major database changes which were irreversible. So the only way to get back down from an acs 5.3 to acs 5.2 was to reimage install the last patch that my old database was on, and restore my old database.

Thanks,

Sent from Cisco Technical Support iPad App

Tarik Admani *Please rate helpful posts*
New Member

Re: downgrade ACS 5.3 to 5.2

Tarik ,

Yes i was talking about re-imaging when i said about using ISO DVD to do the downgrade.

By the way, the error message with application command:
 
ACS1121-1/cisco# application upgrade ACS_5.2.0.26.tar.gz TEST
Do you want to save the current configuration ? (yes/no) [yes] ? yes
Generating configuration...
Saved the running configuration to startup successfully
% Install package is older than the currently installed version. Remove first if downgrade is desired.
 
That was downgrading from 5.3 to 5.2.
 
You will need to Download the iso file and burn it on a DVD and re-image the ACS as per:
 
http://tools.cisco.com/squish/F0994

Hope This Clear

1295
Views
0
Helpful
5
Replies