Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Download ACL - Help

Hello,

I need syntax on how to create an ACL and apply to a user, (Example : deny host 192.168.1.5 / 192.168.1.9 / all all)

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Download ACL - Help

This is an example using NAFs, but you can easily skip the NAF part:

http://admingods.us/wp-content/uploads/2008/04/asa-acs-4.pdf

Regards

Farrukh

7 REPLIES

Re: Download ACL - Help

On which device? ASA, VPNC?

Regards

Farrukh

New Member

Re: Download ACL - Help

on ACS Server ; under download ACL

Re: Download ACL - Help

Thats cool, but which device do you want to download the ACLs to? The AAA Client? Router, ASA?

Regards

Farrukh

New Member

Re: Download ACL - Help

Thanks ...

Its Router and ASA

New Member

Re: Download ACL - Help

Thanks Happs.

But this is not my requirement.

I want to allow specific host for a specific user by using ACL on ACS Box.

Let me give you an example :-

A remote-access user gets authenticated via ACS and should be allowed to access a specific host on the network. ( Only allowed to access Data-Server on the network i.e host IP 192.168.1.150 )

I Guess to get this working we need to create an ACL on ACS-BOX and apply to user-profile..

How to create ACL to permit DATA-Server Host only and deny all

===============================

permit host 192.168.1.150

deny ip host any any

===============================

Re: Download ACL - Help

This is an example using NAFs, but you can easily skip the NAF part:

http://admingods.us/wp-content/uploads/2008/04/asa-acs-4.pdf

Regards

Farrukh

198
Views
5
Helpful
7
Replies