I have some downloadable acls working fine filtering traffic from the client towards the unencrypted connect. I am having problems with getting some traffic working the other way, I just want to allow RDP to the clients.
This is the acl :
permit TCP any any eq 80 permit TCP any any eq 443 ... removed for permit TCP 172.16.0.0 0.0.255.255 172.16.x.0 0.0.0.255 eq 3389
In the last line the 172.16/8 is the source and 172.16.x/24 the destination,
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...