Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Empty accounting log in ISE

Hi,

I am using ISE1.1.1 with 2960.

Recently I found there is some empty log in accounting report.(see AAA accounting.png)

So I do a sniffer and find out that source IP is the 2960.

Then I got to check the log in "Network Device Log"(See Network device log.png)

I can see the IP address of 2960.

Can anybody know why the log in AAA accouting is empty and how to get rid of them.

Some aaa and radius config in 2960.

aaa new-model

aaa authentication dot1x default group radius

aaa authorization network default group radius

aaa accounting dot1x default start-stop group radius

aaa server radius dynamic-author

client X.X.X.X server-key 7 0XXXXXXX43

aaa session-id common

radius-server attribute 6 on-for-login-auth

radius-server attribute 8 include-in-access-req

radius-server attribute 25 access-request include

radius-server dead-criteria time 5 tries 3

radius-server host X.X.X.X auth-port 1812 acct-port 1813

radius-server key 7 XXXXXXXX500

radius-server vsa send accounting

radius-server vsa send authentication

Thanks.

Everyone's tags (2)
433
Views
0
Helpful
0
Replies
CreatePlease login to create content