Hi,
I am using ISE1.1.1 with 2960.
Recently I found there is some empty log in accounting report.(see AAA accounting.png)
So I do a sniffer and find out that source IP is the 2960.
Then I got to check the log in "Network Device Log"(See Network device log.png)
I can see the IP address of 2960.
Can anybody know why the log in AAA accouting is empty and how to get rid of them.
Some aaa and radius config in 2960.
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client X.X.X.X server-key 7 0XXXXXXX43
aaa session-id common
radius-server attribute 6 on-for-login-auth
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server host X.X.X.X auth-port 1812 acct-port 1813
radius-server key 7 XXXXXXXX500
radius-server vsa send accounting
radius-server vsa send authentication
Thanks.