Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Enable password, when using tacacs+

Hi,

I have been experimenting with acs 4.2 and a cisco asa 5510. I have managed to authenticate the ASA users with my tacacs server. The user "test" is authenticated with the tacacs server, and can log in. But the enable password is wrong, because i dont know where to place it in the tacacs server.

Now my question is, where do i set my enable password when authenticatig with tacacs+. And for this i mean in the acs 4.2, i know how to do it on the asa.

Thanks in advance!

Sent from Cisco Technical Support iPhone App

1 ACCEPTED SOLUTION

Accepted Solutions

Enable password, when using tacacs+

Hi,

Give this a shot -

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/UsrMgt.html#wpxref14440

Thanks,

tarik Admani

Tarik Admani *Please rate helpful posts*
4 REPLIES

Enable password, when using tacacs+

Hi,

Give this a shot -

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/UsrMgt.html#wpxref14440

Thanks,

tarik Admani

Tarik Admani *Please rate helpful posts*
New Member

Re: Enable password, when using tacacs+

Thanks for your reply!

But if i follow the steps that are discribed in the document. Will the enable password of thats user be the enable password to enter the privilige mode on the asa?

Sent from Cisco Technical Support iPhone App

Enable password, when using tacacs+

Yes.

Tarik Admani *Please rate helpful posts*
New Member

Re: Enable password, when using tacacs+

Great! Will give it a try tommorow.

Sent from Cisco Technical Support iPhone App

844
Views
0
Helpful
4
Replies
CreatePlease to create content