06-07-2010 12:51 PM - edited 03-10-2019 05:10 PM
We have a 5400 plataform configured with Radius Accounting and I am seeing that the attribute 8 (Framed-IP-Address) appears only in the Stop message.
The cuestions is...how i can to do that the attribute 8 will be included in the Start message too?
Regards
CONFIGURATION
ip radius source-interface GigabitEthernet0/0.63
aaa new-model
radius-server host 200.49.193.225 auth-port 1812 acct-port 1813
radius-server key cisco1
aaa group server radius RADIUS-VLZ1
server 200.49.193.225
aaa dnis map enable
aaa dnis map 1151307063 authentication ppp group RADIUS-VLZ1
aaa dnis map 1151307063 accounting network start-stop group RADIUS-VLZ1
aaa authentication login default group RADIUS-VLZ1 local
no aaa authentication ppp default local
aaa authentication ppp default if-needed radius
aaa authorization network radius
aaa accounting exec default start-stop group RADIUS-VLZ1
aaa accounting network default start-stop group RADIUS-VLZ1
radius-server attribute 8 inc
DEBUG RADIUS
*Jul 15 16:56:32.856: RADIUS: Acct-Session-Id [44] 10 "00000192"
*Jul 15 16:56:32.856: RADIUS: User-Name [1] 9 "italtel"
*Jul 15 16:56:32.856: RADIUS: Acct-Authentic [45] 6 RADIUS
[1]
*Jul 15 16:56:32.856: RADIUS: Acct-Status-Type [40] 6 Start
[1]
*Jul 15 16:56:32.856: RADIUS: Calling-Station-Id [31] 12 "1147876876"
*Jul 15 16:56:32.856: RADIUS: Called-Station-Id [30] 14 "541151307063"
*Jul 15 16:56:32.856: RADIUS: NAS-Port [5] 6 544
*Jul 15 16:56:32.856: RADIUS: NAS-Port-Id [87] 9 "tty4/04"
*Jul 15 16:56:32.856: RADIUS: NAS-Port-Type [61] 6 Async
[0]
*Jul 15 16:55:23.508: RADIUS: Framed-IP-Address [8] 6 10.82.94.11
*Jul 15 16:55:23.508: RADIUS: User-Name [1] 6 "pepe"
*Jul 15 16:55:23.508: RADIUS: Acct-Authentic [45] 6 RADIUS
[1]
*Jul 15 16:55:23.508: RADIUS: Acct-Session-Time [46] 6 15
*Jul 15 16:55:23.508: RADIUS: Acct-Input-Octets [42] 6 3613
*Jul 15 16:55:23.508: RADIUS: Acct-Output-Octets [43] 6 118
*Jul 15 16:55:23.508: RADIUS: Acct-Input-Packets [47] 6 55
*Jul 15 16:55:23.508: RADIUS: Acct-Output-Packets [48] 6 7
*Jul 15 16:55:23.508: RADIUS: Acct-Terminate-Cause[49] 6 user-request
[1]
*Jul 15 16:55:23.508: RADIUS: Acct-Status-Type [40] 6 Stop
06-07-2010 02:12 PM
Hi ,
Try using:
aaa accounting delay-start
Regards,
~JG
Do rate helpful posts
02-13-2011 10:03 PM
Does the above input solved your problem?
thanks,
Raj
02-14-2011 04:55 AM
Yes, thanks a lot.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide