Does anyone have a working example of using FreeRADIUS to authenticate and authorise users for admin access.
I have tried using the examples on the FreeRADIUS wiki to no avail although it's almost working. I'm testing the configuration with a 3550 switch and from debugging at both ends I can see that they are talking, but there appears to be a problem when it comes to the authorization stage.
The FreeRADIUS server is sending the cisco-avpair = "shell:priv-lvl=15", but the switch is saying no appropriate authorization...
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...