Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FWSM 2.3(4) with AAA accounting

i have FWSM version 2.3(4) , but i can't find a command to enable AAA accounting to

remote TACACS server , does 2.3(4) support AAA accounting or not , and what is the minimum version that support AAA accounting

3 REPLIES
Cisco Employee

Re: FWSM 2.3(4) with AAA accounting

FWSM 2.3(4) does support aaa accounting.  To define a TACACS server, you can use the 'aaa-server' command.  Please see the command reference below for more details:

aaa accounting:

http://www.cisco.com/en/US/docs/security/fwsm/fwsm23/command/reference/ab.html#wp1073208

aaa-server:

http://www.cisco.com/en/US/docs/security/fwsm/fwsm23/command/reference/ab.html#wp1070086

New Member

Re: FWSM 2.3(4) with AAA accounting

OK but what i want is enable accounting for commands entered during user session , like these commands on router:

aaa accounting commands 0 default start-stop group tacacs+
aaa accounting commands 1 default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+

is it support accounting for user commands ?

Cisco Employee

Re: FWSM 2.3(4) with AAA accounting

Hi Hany,

The FWSM does support command accounting however it wasn't added until 3.1(1):

http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/command/reference/a1.html#wp1611346

Thanks,

Nate

310
Views
0
Helpful
3
Replies