How to configure cisco 804 router for ISDN users.....

[m_aurangzeb]

On cisco AS5300 Access server i ve configured isdn users who uses ISDN modem.

But my few users have purchased cisco 804 router(instead of ISDN modem) what configuration should i make on 804 router, without changing any configuration on AS5300 access server.

Pls reply me as soon as possible.

[mheusinger]

Hello,

there is a good explanation given in the "Cisco IOS Dial Technologies Configuration Guide" in the section "Configuring Peer-to-Peer DDR with Dialer Profiles" at

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca721.html

and in "Configuring ISDN on Cisco 800 Series Routers" at

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca725.html

Another exmple (although with 2500 routers) is found at "Configuring ISDN DDR with Dialer Profiles" http://www.cisco.com/en/US/tech/tk801/tk133/technologies_configuration_example09186a0080093c2e.shtml

Hope this helps! Please rate all posts.

Regards, Martin