The show logging command through CLI will show you the logging of the ADE-OS, not the ISE Application. This shows all logged entries from the installation of the ISE. to see what other operations are available through the show logging command, type sh logging ?:
To delete the local logs, you must log in through the WebGUI and navigate to Administration > System > Logging. Click Local Log Settings in the left menu. You can then set the duration to keep the logs and can even click on Delete Local Logs Now if you want to completely purge the local logs. NOTE that this will only delete the logs local to the ISE and NOT on any remote logging server.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...