Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How to install a patch on remaining ISE servers

Hello,

I have a cluster of ISE servers in version 1.1.4. I patched it with Patch 4.

Then, I added more ISE servers in version 1.1.4. How to I patch these new servers to Patch 4 ? In the status page, it displays correctly that some servers have the patch installed while the new ones do not have it installed. But I don't find the way do install the patch on the remaining server ?

Can anyone tell me how to proceed ?

Thanks,

David

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions

How to install a patch on remaining ISE servers

Please patch them from the CLI, place the patch file on your repository and run the "patch...." command and when they come back up and connect to the ISE nodes you will see the correct status in the patch install status screen.

I have done this many times and have had success, and honestly think this is the only method.

Tarik Admani
*Please rate helpful posts*

Tarik Admani *Please rate helpful posts*
6 REPLIES

How to install a patch on remaining ISE servers

Please patch them from the CLI, place the patch file on your repository and run the "patch...." command and when they come back up and connect to the ISE nodes you will see the correct status in the patch install status screen.

I have done this many times and have had success, and honestly think this is the only method.

Tarik Admani
*Please rate helpful posts*

Tarik Admani *Please rate helpful posts*
Cisco Employee

How to install a patch on remaining ISE servers

Silver

Re: How to install a patch on remaining ISE servers

kindly check the following link for step by step update method

http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_admin.html#wp1259408

New Member

Re: How to install a patch on remaining ISE servers

Hi,

I had to follow Tark Admani's advice to patch ISE servers individually. It worked like a charm by installing the patch from the CLI on the servers.

The Cisco docs on how to manage patch installation does not mention that method.

Many thanks,

David

Bronze

How to install a patch on remaining ISE servers

New Member

Re: How to install a patch on remaining ISE servers

If you need to install the patch on one or more secondary nodes, ensure that the nodes are up and repeat the process from Step 1 to install the patch on the remaining nodes.

Please go through the link for the installation steps and form the page 119.

http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_ug.pdf

524
Views
5
Helpful
6
Replies
CreatePlease to create content