Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IAS 2003 and ASA5510

We are using ASA5510 as our VPN gateway and MS IAS 2003 for RADIUS & AAA. Using Cisco VPN client it is not able to authnticate. I get the following error in Event Viewer:

Policy-Name = Dialup Group

Authentication-Type = PAP

EAP-Type = <undetermined>

Reason-Code = 66

Reason = The user attempted to use an authentication method that is not enabled on the matching remote access policy.

2 REPLIES
New Member

Re: IAS 2003 and ASA5510

I had same issue and resolved by enable all the authentication type such as chap,....

New Member

Re: IAS 2003 and ASA5510

I just dealt with this. Go into your IAS console and select properties for your remote access policy 'Dialup Group.' Click ;Edit Profile' and then the 'Authentication' tab. Enable 'PAP'. That should do it!

183
Views
0
Helpful
2
Replies