Does anyone know how to identify which SSID the user is attempting to authenticate with?
My use case is this: I have an Inside network tied to SSID 1 and a Outside Guest network tied to SSID 2. Both WLANs are using PEAP w/MSCHAP v2 and they are authenticating to the same ACS servers. The users are in the same AD group (and this must not change). I want to apply MAR to the access policy when the user authenticates to the inside network on SSID 1, but no MAR when authenticating to the outside network on SSID 2.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...