installing the Cisco NAC agent through the Active Directory Group Policy
Could ay one plz help me in installing the Cisco NAC agent through the Active Directory Group Policy. (Windows 2008 R2)
Currently Cisco NAC CAS servers has been installed, configured and the switches are added. But the ports are not active. Currently users are not passing through the NAC. When the ports are active and the users trying to access the network, the browser will ask the users to install the Cisco NAC Agent.
I need t by pass this by installing the Cisco NAC agent through the active directory Group Policy.
Could any one help me in installing the Cisco NAC agent (4.9.1) to all the users in the Network (Windows XP / 7 )through Active Directory so that the users will not know that the Cisco NAC agent has been installed in their computers. By this way the users need not install the Cisco NAC agent through the Web browser and will just login their user name and password and get into the network.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...