at the ACS server in the user setup there is a field
Client IP Address Assignment.
There I can select a static ip addresss for a client.
When I do so, does the ACS only check, if the client uses this IP address, and if not, the access is denied, and the assignment of the right IP address has to be handeled on the DHCP server or somewhere else,
or is this address then assigned to the endstation
via DHCP by the ACS Server, or can the ACS Server communicate with a DHCP Server to tell him to asign this IP address to a particular client ?
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...