ISE 1.1.1 to ISE 1.2 upgrade path for ISE node

[paragmahajan40]

Hi,

Currently in ISE deployment , we have  2 ISE nodes with 1.1.1.268 version  with latest patch,

ISE nodes hold following  personas

Node1 :  Admin, Monitoring ,  PSN

Node 2 : PSN

How will above deplyoment should be upgrade to 1.2 ?

In which order they should be upgraded  ?   Any supporting doc covering above deployment for ISE 1.2 upgrade .

[Charlie Moreton]

First, you should capture backups.

Once that is done, you want to ensure that you are using the latest patch for v1.1.1 (patch 5).

From there, you can do a direct upgrade to v1.2.  You want to upgrade Node 1 first.

You can use this document to help in your upgrade.  Chapter 1 helps with the initial upgrade of Node 1 and Chapter 2 covers Node 2.

http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide.pdf

Hopefully this answers you question. 

Please rate Helpful posts and mark question as answered if this does, in fact, answer the question.

Charles Moreton

[aqjaved]

Please check the below link for ISE 1.1.x to 1.2 upgrade:

Link-1

http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide.pdf

[kaaftab]

Kindly check the following links for references

               http://www.cisco.com/en/US/docs/security/ise/1.2/release_notes/ise12_rn.pdf

               http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_01.pdf

               https://www.cisco.com/en/US/docs/security/ise/1.2/open_source_license/Cisco_Identity_Services_Engine_1.2_Open_Source_Documentation.pdf