Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISE 1.2 Employee Portal

Hi Guys,

I'm a little bit new with this Cisco ISE and I'm wondering if you can help me.

My setup is a WLAN 802.1x and I'm planning to deploy in the ISE just Device Registration WebAuth (only showing AUP) since the username and password authentication are checked via the WLAN settings of the computer.

My question are these, if I do that setup and when the employee logs out and in again does that employee needs to see again the AUP? Also, how the ISE checks if the device registration has been successfully done? Does the attribute Endpoint: BYODRegistration = YES will took effect?

Thank you very much in advance.

Everyone's tags (1)
10 REPLIES
Gold

If you had selected every

If you had selected every login in multiportal then, the user needs to accept AUP with every login:

And in Sponsor portal you will be able to see the device status

 

 

 

 

 

 

Cisco Employee

If you are using Cisco's

If you are using Cisco's wireless I woudl highly recommend that you push this funciton to the WLCs. The reasons I would recommend this are:

1. This type of authentication would take a Plus license

2. If you only care of the users to see and accept an AUP then the "passthrough" function in the WCL would do the job perfectly

3. The registered devices remian in teh system indefinitely. The current version of ISE does not proivde a mechanism to automatically purge those devices. Thus, you would have to manually remove them

 

Thank you for rating helpful posts!

Thank you for rating helpful posts!

(No subject)

Cisco Employee

My question are these, if I

My question are these, if I do that setup and when the employee logs out and in again does that employee needs to see again the AUP?

 

Choose Administration > Web Portal Management > Settings > Guest > Multi-Portal Configuration.

 Check the Guest portal to update and click Edit .

 Click the Operations tab.

Choose one of these options to determine whether guest users must agree to an acceptable use policy:

– Not Used

First Login

Every Login

New Member

Hi I was able to configure

Hi 

I was able to configure now what I wanted however, when I go to "MyDevice" portal, the status of my device is still in pending even though I already did the device registration.

Please see attached file. What would I do for that issue to be resolve?

Thanks,

 

Niks

New Member

Hi Experts,By the way, I've

Hi Experts,

By the way, I've just noticed that my AUP is not showing up, after I hit the register button in the self-provisioning page, it goes already to the confirmation that the device was successfully registered.

I already enabled the AUP in "MyDevice" Portal settings but the AUP still doesn't shows up.

Thanks in advance.

 

Niks.

Cisco Employee

A couple of questions:1.

A couple of questions:

1. Which type of portal did you select for the DRW flow?

2. Do you have the "Self-provisioning flow" enabled

 

Thank you for rating helpful posts!
New Member

Hi Neno,Good Day!I'm trying

Hi Neno,

Good Day!

I'm trying Native Supplicant Provisioning but I set the Client Provisioning settings to Network Access so that it will not check for the Client Provisioning policies.

Also, I already enabled the Self-Provisioning option in the Guest settings in Web Management Portal settings.

Thanks,

niks

Silver

Device Registration WebAuth

Device Registration WebAuth and MyDevices portal are not the same, don't confuse them. Use either but not both.

Cisco Employee

Hello Niks-For your scenario

Hello Niks-

For your scenario (Device Registration WebAuth) you need to select the "Device Web Authorization Portal" when creating the portal. In that portal the "Enable Self-Provisioning Flow" is not available since it is used for the BYOD registration/provisioning process. 

Hope this helps!

 

Thank you for rating helpful posts!

Thank you for rating helpful posts!
309
Views
5
Helpful
10
Replies