Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ISE 1.2 Guest Portal - Device registration portal

Hello,

I have a problem with the following setup:

- Cisco ISE 1.2 (latest patch)

- Cisco WiSM with 7.0.220.0 (first generation)

I have build Guest access via ISE. Because the WiSM's highest version is 7.0.X I used LWA with a redirect to the ISE guest portal. When using the Guest SSID with a iPad the client is redirected to the ISE guest portal and the user can enter his credentials (deliverd by the Sponsor). After clicking "Sign On" the client is forwarded to the "Device Registration Portal" of ISE and need to register his MAC address.

We have try a lot of differend settings but we cannot switch off the forward to the "Device Registration Portal". We only want to use the Guest User portal.

Please can someone help me to find a solution for this problem?

Thank you in advance.

Everyone's tags (5)
4 REPLIES
Cisco Employee

ISE 1.2 Guest Portal - Device registration portal

I know this might be reaching, but have you turned off the My Devices portal?

If so, an idea of the different settings you have already tried might help.

My_Devices.GIF

Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.

Charles Moreton

New Member

ISE 1.2 Guest Portal - Device registration portal

Thank you for the tip, I've tested this but it doens't solve the problem.

ISE 1.2 Guest Portal - Device registration portal

I think you should disable in the DefaultGuestPortal (Administration  >> Web Portal Management >> Settings >> Guest >>  Multi-Portal Configurations >> DefaultGuestPortal >>  Operations  .... Uncheck the option Enable Self-Provisioning Flow

ISE 1.2 Guest Portal - Device registration portal

Yes nkumarsr - that's correct.

590
Views
5
Helpful
4
Replies
CreatePlease to create content