Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ISE 1.2 rejects RADIUS messages from 5508 WLC

The setup in ref is:

WLC 5508 HA pair running 7.6 talking to ISE 1.2 patch 7 (was 6).

 

Wireless users are authenticated fine, so the 5508 is a valid NAD in ISE, but...

 

When I setup active RADIUS fallback, so that the WLC can poll the ISE servers I get the message:

 

"The RADIUS request from a non-wireless device was dropped because the installed license is for wireless devices only"

 

Why would ISE drop a RADIUS message from a WLC which is a wireless device?  Surely this is a mistake?

 

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Hi Nicholas,This is a known

Hi Nicholas,

This is a known defect.

CSCug34679    ISE drop keep alive coming from WLC. 

<B>Symptom:</B>
ISE drops keep alive authentications coming from the WLC, with message 11054 Request from a non-wireless device due to installed wireless license.
<B>Conditions:</B>
When only a wireless license is install on the ISE and using active keep alive on the WLC.
<B>Workaround:</B>
Use passive keep alive on the WLC and not active.

 

Regards,

Jatin Katyal

*Do rate helpful posts*

~BR Jatin Katyal **Do rate helpful posts**
2 REPLIES

This message says, Radius

This message says, Radius authentication request is coming form  NON- wireless devices. Check if the same ISE is Radius for NAD like Switches. In order to support wired devices ( base and advance License features )  in addition to wireless , you need to have Wireless upgrade license.

Cisco Employee

Hi Nicholas,This is a known

Hi Nicholas,

This is a known defect.

CSCug34679    ISE drop keep alive coming from WLC. 

<B>Symptom:</B>
ISE drops keep alive authentications coming from the WLC, with message 11054 Request from a non-wireless device due to installed wireless license.
<B>Conditions:</B>
When only a wireless license is install on the ISE and using active keep alive on the WLC.
<B>Workaround:</B>
Use passive keep alive on the WLC and not active.

 

Regards,

Jatin Katyal

*Do rate helpful posts*

~BR Jatin Katyal **Do rate helpful posts**
366
Views
0
Helpful
2
Replies
CreatePlease to create content