ISE 802.1x EAP-TLS machine and smart card authentication
I suspect I know the answer to this, but thought that I would throw it out there anway...
With Cisco ISE 1.2 is it possible to enable 802.1x machine AND user smart card authentication simultaneously for wired/wireless clients (specifically Windows 7/8, but Linux or OSX would also be good). I can find plenty of information regarding 802.1x machine authentication (EAP-TLS) and user password authentication (PEAP), but none about dual EAP-TLS authentication using certificates for machines and users at the same time. I think I can figure out how to configure such a policy in ISE, but options seem to be lacking on the client end. For example, the Windows 7 supplicant seems only able to present either a machine or user smart card certificate, not one then the other. Plus, I am not sure how the client would know which certificate to present, or if the type can be specified from the authenticator.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...