Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISE Client Posture Policies

                   Hi!

Anybody knows how to configure Cisco ISE Posture Policy to check windows Service Pack? For example, we need to create a policy to check if machine has a Antivirus and the last service pack installed. The policy for antivirus it's simple, but we don't know how to configure for Service Pack check.

Thanks!

Everyone's tags (4)
2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

ISE Client Posture Policies

Policy > Policy Elements > Condidtions > Posture > Registry Condition

  • pc_W7_SP0    
  • pc_W7_SP0_int
  • pc_W7_SP1   
  • pc_W7_SP1_int

Use those or duplicate them and modify as you need.


I hope you find this information useful, if it was satisfactory for you, please mark the question as Answered. Please rate post you consider useful. -James
New Member

ISE Client Posture Policies

For those specifc examples, no.  They are pc_  = pre configured from Cisco.

If you want to modify them, you will need to adjust the Value to match what you need.

As always, remember that Registry Valures are CasE SenSITIve.  :-)

I find it best to export the reg key area I need and copy-paste leaving out the " Quotation marks"


I hope you find this information useful, if it was satisfactory for you, please mark the question as Answered. Please rate post you consider useful. -James
4 REPLIES
New Member

ISE Client Posture Policies

Policy > Policy Elements > Condidtions > Posture > Registry Condition

  • pc_W7_SP0    
  • pc_W7_SP0_int
  • pc_W7_SP1   
  • pc_W7_SP1_int

Use those or duplicate them and modify as you need.


I hope you find this information useful, if it was satisfactory for you, please mark the question as Answered. Please rate post you consider useful. -James
New Member

ISE Client Posture Policies

Do we need to create the registry condition?

What is the Registry Type, Registry Root Key, Sub-key and Value Operator to check?

Thanks.

New Member

ISE Client Posture Policies

For those specifc examples, no.  They are pc_  = pre configured from Cisco.

If you want to modify them, you will need to adjust the Value to match what you need.

As always, remember that Registry Valures are CasE SenSITIve.  :-)

I find it best to export the reg key area I need and copy-paste leaving out the " Quotation marks"


I hope you find this information useful, if it was satisfactory for you, please mark the question as Answered. Please rate post you consider useful. -James
New Member
677
Views
0
Helpful
4
Replies