Thanks for your assistance (opened SAC case 191758). I read the post to which you referred. It was marginally helpful. Have you ever completed a failover test in production? My questions surrounding an ISE test plan remain unanswered.
What is a good way to verify/test all three ISE persona for HA? Reload the primary admin, MnT, PSN node? Shut the switch interface to which the primary node is connected?
Will I see a performance spike when I promote the secondary Admin persona to primary? If so, what's the expectation - 100% CPU utilization?
Will any alarms be generated when I halt the primary node to test HA? If so, which ones?
Documentation is completely silent about the ISE pop-up advisory you will get after you click the box to promote the secondary admin to primary, stating the admin function may be unavailable for 10 minutes. How do I monitor anything when the admin persona is not available while switching from primary to admin?
What logs/support bundle do I need to download and review to confirm monitoring is occurring normally after the secondary admin is promoted to primary and becomes active?
Will I see a performance hit when I revert back to the primary admin node? What other post HA test actions should I take? Documentation says after reverting back to primary admin node, backup operational data off the secondary admin node (now active) and restore to primary to fill in the monitoring gaps. What logs should be backed up? Details, please!
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...