Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ise-patchbundle-1.1.1.268-1-60802.i386.tar.gz

Hi all,

I installed ise-1.1.1.268.i386.iso on a scratch to the new NAC 3315. As i check cisco download mentioned it need to patch following files :

ise-patchbundle-1.1.1.268-1-60802.i386.tar.gz

But once try to patch it show like attachment message, is it mean that i no need to do the patching?

Or is there any instruction need to remove and reinstall for this files.

please advice, thanks

Noel

1 ACCEPTED SOLUTION

Accepted Solutions

Re: ise-patchbundle-1.1.1.268-1-60802.i386.tar.gz

You are using the wrong command, it is patch install (name) repository (repo name)

You can install it through the web also administration, maintenance, patch management.

Either method will work.

Hope that helps,

Sent from Cisco Technical Support iPad App

Tarik Admani *Please rate helpful posts*
4 REPLIES

Re: ise-patchbundle-1.1.1.268-1-60802.i386.tar.gz

You are using the wrong command, it is patch install (name) repository (repo name)

You can install it through the web also administration, maintenance, patch management.

Either method will work.

Hope that helps,

Sent from Cisco Technical Support iPad App

Tarik Admani *Please rate helpful posts*
New Member

ise-patchbundle-1.1.1.268-1-60802.i386.tar.gz

thanks sir,

can you paste the documentation link here?

So that i can refer.

Thanks

Noel

ise-patchbundle-1.1.1.268-1-60802.i386.tar.gz

Yong,

You can apply this patch from the web-base. This is not the application bundle so don't worry to apply via command-line.

Cool !!

But if you make a big change like upgrade the ise application, you should make it via command-line

application upgrade ise-appbundle-x.x.x.xxx.i386.tar.gz "repository_name"

But don't forget to set your repository (ftp, ...)

Cheers !

Pongsatorn M.

Re: ise-patchbundle-1.1.1.268-1-60802.i386.tar.gz

Here is the link for installing the patch through the web interface - http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_admin.html#wp1054080

Here is the cli command - http://www.cisco.com/en/US/docs/security/ise/1.1/cli_ref_guide/ise_cli_app_a.html#wp1994528

Thanks,

Sent from Cisco Technical Support iPad App

Tarik Admani *Please rate helpful posts*
700
Views
0
Helpful
4
Replies
CreatePlease to create content