Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ise with parellel on wireless

                   Hi, I'm using ISE 1.2 and WLC 7.4.100

OSX is able to do dot1x authentication, after that, we turned on the parellel and used windows with bridge mode.

and it was able to get on the internet. and I want it not to. Is there any way to prevent pralellel on the internet?

Everyone's tags (4)
4 REPLIES

Re:ise with parellel on wireless

Hi,

Are you seeing any additional auth attempts from the bridged mac address.


Sent from Cisco Technical Support Android App

Tarik Admani *Please rate helpful posts*
New Member

Re: Re:ise with parellel on wireless

No, it just goes to the internet.

I think WLC does not even know there is another PC behind PHYSICAL PC



Sent from Cisco Technical Support iPhone App

Re:ise with parellel on wireless

Are you sure you are using bridged mode and not nat mode? It seems as if the wlc would have a dedicated client entry for each different mac address that associates the controller.


Sent from Cisco Technical Support Android App

Tarik Admani *Please rate helpful posts*
New Member

ise with parellel on wireless


This link gives all the information of your query to block and allow internet through wireless bridge mode.

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bba10d.shtml

342
Views
0
Helpful
4
Replies
CreatePlease login to create content