07-21-2013 03:41 AM - edited 03-10-2019 08:40 PM
Endpoint Does Not Align to the Expected Profile
Solved! Go to Solution.
07-21-2013 04:16 AM
There could be an SNMP configuration issue on Cisco ISE, the switch, or both.
• The profile is likely not configured correctly, or contains the MAC address of
the endpoint already.
Verify the SNMP version configuration on both Cisco ISE and the switch for
SNMP trap and SNMP server settings.
• The Profiler profile needs to be updated. Navigate to Administration > Identity
Management > Identities > Endpoints, select the endpoint by MAC address
and click Edit
07-21-2013 04:16 AM
There could be an SNMP configuration issue on Cisco ISE, the switch, or both.
• The profile is likely not configured correctly, or contains the MAC address of
the endpoint already.
Verify the SNMP version configuration on both Cisco ISE and the switch for
SNMP trap and SNMP server settings.
• The Profiler profile needs to be updated. Navigate to Administration > Identity
Management > Identities > Endpoints, select the endpoint by MAC address
and click Edit
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: