Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ISE

Endpoint Does Not Align to the Expected Profile

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

ISE

There could be an SNMP configuration issue on Cisco ISE, the switch, or both.

• The profile is likely not configured correctly, or contains the MAC address of

the endpoint already.

Verify the SNMP version configuration on both Cisco ISE and the switch for

SNMP trap and SNMP server settings.

• The Profiler profile needs to be updated. Navigate to Administration > Identity

Management > Identities > Endpoints, select the endpoint by MAC address

and click Edit

1 REPLY
Cisco Employee

ISE

There could be an SNMP configuration issue on Cisco ISE, the switch, or both.

• The profile is likely not configured correctly, or contains the MAC address of

the endpoint already.

Verify the SNMP version configuration on both Cisco ISE and the switch for

SNMP trap and SNMP server settings.

• The Profiler profile needs to be updated. Navigate to Administration > Identity

Management > Identities > Endpoints, select the endpoint by MAC address

and click Edit

171
Views
0
Helpful
1
Replies
CreatePlease to create content