Local AAA server configuration for https authentication proxy
I have the following scenario:I require to set up a transparent firewall using a Cisco 1841 router with 2 Fast Ethernet interfaces with IOS version 12.4(15)T9 Advanced Security.The project also calls for authenticating users using the ip auth-proxy feature.The users should use https to connect to an internal server.The IP addresses of the users are dynamic (i.e. they may authenticate from the Internet).I have set up successfully the ip auth-proxy feature using an external ACS server using TACACS+.However, i want to use the AAA local server feature in order to implement this project instead of using an external AAA server.
The question is how to configure the local AAA attributes in order to have the same functionality as when using an external AAA server(i.e dynamic proxy ACL entries permitting specific IP addresses and protocols) without using one(i.e using only the local AAA server feature of Cisco IOS).
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...