Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Local User Authorization

TACACS+ is configured for AAA (Authentication and Authorization) with LOCAL as a backup. But how can I ensure that the local user will be authorized to perform tasks in the event that TACACS+ is unavailable. The authentication fails over fine, but Im not sure how to set up authorization for the local user

3 REPLIES
Cisco Employee

Re: Local User Authorization

Hi,

If you have created local users with privlege 15 then they won;t face any issue in tacacs server absence but if you really want to configure local authorization with diffferent privlege level then

check this:

http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml

HTH

Regards,

JK

~BR Jatin Katyal **Do rate helpful posts**
New Member

Re: Local User Authorization

Most of the time this is true, but occasionally I get the following "Fallback authorization. Username 'enable_15' not in LOCAL database

Command authorization failed

"

Cisco Employee

Re: Local User Authorization

Get your running config.

~BR Jatin Katyal **Do rate helpful posts**
488
Views
0
Helpful
3
Replies
CreatePlease login to create content