Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Logging in to a Nexus 5000 and UCS Manager via ACS



Hi all,

I have an environment with Nexus 5000's and 6000's that are running UCS
manager.  My problem is that it seems that the two switches both use the
Cisco-AV-Pair but have different roles associated with admin level privs.

For example, I have successfully logged in to the 5000 using the AV-Pair
shell:roles="network-admin" and I have also successfully logged in to
the UCS manager the AV-Pair shell:roles=admin, but when I have both AV-Pairs in
my shell command set it seems that the UCS manager is selecting the AV-Pair
that is for the 5000, which drops me in to a non-admin session.

I need to be able to have both AV-Pairs in my shell command set and make sure the
proper Pair is selected for the proper switch.

Thanks,



Kenny



1 REPLY
New Member

Re: Logging in to a Nexus 5000 and UCS Manager via ACS

Answered my own question...Its really simple actually, both values have to be in the same attribute, i.e.

shell:roles="admin network-admin"

440
Views
0
Helpful
1
Replies
CreatePlease login to create content