Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

logging of Pix command line events on Pix

On an IOS router, I can log the commands a user enters to a TACACS server with:

aaa accounting commands 15 default start-stop group OSFMC These commands are logged to ACS and can be recorded...

Can I do the same thing with PixOS?

2 REPLIES
Cisco Employee

Re: logging of Pix command line events on Pix

Hi Leonard,

There is no actual command accounting available, but by having syslog activated on the PIX, it will show who did what, as shown in the following example.

http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_tech_note09186a00800949d6.shtml#accounting

Thanks,

yatin

New Member

Re: logging of Pix command line events on Pix

from what I read tacacs allows accounting on traffic passing through the pix only.. you need to configure syslog to record commands entered on the pix..

hth

133
Views
0
Helpful
2
Replies
CreatePlease to create content