Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Logical Profiles in ISE 1.2

I created a logical profiles group that is assigned with the Apple-ipad, Apple-iPhone and Apple-iDevice policies. Now ISE will not update the feed policies for the three devices. This is the message that I recieved from ISE when it does it Feed Polices update, I use the logical profiles group matching for authentication and authorization. Is there any way for me to update these feed polices? Thanks for the help!!

Feed Version 1 policies downloaded.

Total number of feed polices to apply are 3.

Feed policies total 3 skipped.

Feed policies warning message : Apple-Device has been changed by admin.

Apple-Device:Apple-iDevice has been changed by admin.

Apple-Device:Apple-iPad has been changed by admin.

Cisco Employee

Logical Profiles in ISE 1.2

Hello Toua,

Please Verify switch configuration for those network segments where endpoints are not being appropriately profiled to ensure that:

•The required information to profile the endpoint is being sent to Cisco ISE for it to profile.

•Probes are configured on the network Policy Service node entities.

•Verify that packets are received at the Cisco ISE profiler module by running the tcpdump function at Operations > Troubleshoot > Diagnostic Tools > General Tools > Tcpdump.

Note If you are observing this issue with endpoints on a WAN collected by HTTP, Netflow, and NMAP, ensure that the endpoint IP address has been updated with a RADIUS/DHCP Probe before other attributes are updated using the above probes

For more information, please visit the following link:

New Member

Logical Profiles in ISE 1.2

Thanks for the reply, I have remove those device from the profiling feed and they were readded to resolve the issue. Thanks

CreatePlease login to create content