Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Login problem in that the radius server is not configured. And the local user does not authenticate

When trying to login, the message appears "No radius server configured" and the local user does not authenticate. How do I access without rebooting the Switch 6500 with CatOS.

2 REPLIES
Cisco Employee

Re: Login problem in that the radius server is not configured. A

Unfortunately if you are locked out you need to do password recovery and you will need a reboot for that.

I hope it helps.

PK

New Member

Re: Login problem in that the radius server is not configured. A

Hi PK.

Thanks for your Attention. You know how to insert a line configuration via SNMP RW  "set radius server 10.112.15.21 auth-port 1645 primary"?

I believe this way or can I work around the problem.

223
Views
0
Helpful
2
Replies