Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Lost administration in a switch

Hello,

I have lost administration in my switch (Cisco Catalyst 6000 Multilayer Switch Feature Card MSFC2) configuring "aaa" It seems due to an ACL and I have no user local configured only line vty password. It has a RW snmp community. Do yo know if is possible to set a username via snmp? or Could you please suggestme another way to recover administration?

My aaa configuration is:

aaa new-model
aaa authentication login default group local tacacs+
aaa authentication enable default enable group tacacs+
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa authorization config-commands
aaa authorization exec default group local tacacs+
aaa authorization commands 15 default local group tacacs+

tacacs-server host 10.10.0.231
tacacs-server host 10.10.0.232
tacacs-server key xxxx

line vty 0 4
exec-timeout 15 0
password  xxxxx

login

In the ACS I have no request login logs

Thanks in advance!!

Everyone's tags (1)
1 REPLY
Cisco Employee

Re: Lost administration in a switch

Password recovery is you option.

Here is an example how to do it on a 6500 http://www.cisco.com/en/US/products/hw/switches/ps708/products_password_recovery09186a00801caa95.shtml

I hope it helps.

PK

305
Views
0
Helpful
1
Replies
CreatePlease to create content