cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
718
Views
0
Helpful
2
Replies

MAC OS-X and authentication via ACS 5.2

rhub
Level 1
Level 1

My customer has a large installed base of MACs, all connected via controller-based (5508) WLAN. He wants to grant access to the network

based on the device's mac addresses and move the WLAN-clients to a specific VLAN.

I added all devices with their mac addresses to the ACS internal identity store for hosts.

According to the following message the client sends the user-login credentials (chegger) within the RADIUS-request instead of the clients mac address and of course it has to fail. 

After many configuration changes, I ended up always with the same result.

Has anybody made the same experiences with MACs ? Can somebody give me a hint ?

I really appreciate very much any reply.

Best regards

Roman

The ACS-configuration is documented in the attachment

2 Replies 2

andrewswanson
Level 7
Level 7

hello - check the wlan setup of the ssid (is mac filtering enabled?) - see the following doc for mac authentication on a WLC

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008084f13b.shtml#c3

hth

andy

hi andy, many thanks for your post. i will check with customer within the next 2 weeks and let you know about the results.

regards

roman

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: