missing AVP 29 VSA 23 in the Radius Access-Request sent by ASA 5545-X 8.6
we are migrating from ASA 5520 Version 8.4(3) to ASA 5545-X Version 8.6(1)2 with the same configuration ;
we are stuck with a Radius authentication problem related to an ASA clientless ASA access ;
when we compare the Radius dialog between each ASA (the old one and the new one) and the same Radius ACS 5.3 server, we can see that the only difference is there is a missing AVP 29 VSA 23 in the Radius Access-Request sent by the new ASA-5545-X compared to the good one sent by the old ASA 5520;
this AVP 29 VSA 23 carries the tunnel-group name as defined in the ASA configurtion ;
5545-X ad 5520 configuration files have been double-checked and compared : no difference between both files
any help would be appreciated to diagnose this problem
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...