01-19-2008 04:31 AM - edited 03-10-2019 03:36 PM
Hi
I have the following problem:
- We have a WLC Version 4.2.61.0
-- We have a SSID wep-cloud
-- We have a SSID wpa-cloud
- We have an ACS Version 3.2
Now I would like to authenticate the SSID wep-cloud with LEAP on the ACS. At the same time, I would like to authenticate the SSID wpa-cloud with PEAP on the same ACS.
Is it somehow possible to use multiple eap types for one device (WLC) on the ACS.
If i configure the WLC under Network Configuration, I can set the Authenticate Using field "RADIUS (Cisco Aironet)" for LEAP or "RADIUS (Cisco IOS/PIX)" for PEAP.
Thanks in advance for your help.
Solved! Go to Solution.
01-24-2008 11:39 AM
It is not possible to use multiple eap types for a single device on the ACS. Following links may help you
01-24-2008 11:39 AM
It is not possible to use multiple eap types for a single device on the ACS. Following links may help you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide