I have a working environment for NAC OOB VGwy. Everything seems to be ok with authentication and posture assesement. PC with NAC Agent is able to authenticate and send posture profile. User is then configured in the proper VLAN.
When looking at summary and online users tabs I'm able to see all details for user connection, but when i look at the 'Reports' tab under 'Clean Access Agent', no reports are being generated. As far as I know there is not much that one should do, but to enable them on the CAM. Any pointers on the probable cause or how to troubleshoot this issue?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...