We are facing the issue with adding CAS server in the CAM manager. While Adding CAS server to CAM manager ; we are getting Failed to add server: Could not connect to 172.22.105.13 error on the CAM manager.
FYI, We have added CAS server certificate on CAM and viceversa. My CAS and CAM server is working in HA mode.
Also We are getting following error on the CAM manager.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...