NMS 9000 via ACS 5.3

[steve switzer]

Hi All

I need to get the nms 9000  to work with the new ACS 5.3.

Looking at the existing ACS 4.0 we have the following attribute set -

cisco-av-pair=shell:roles*"network-admin"

and looking at the below i think we need to have this set somewhere

in order for the ACS to work with the MDS 9000 -

http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_2_x/fm/configuration/guide/radius.html

However how do i put this into the new ACS 5.3

I can put it in like this -

Attrbute              requirement                       value

shell:roles          mandatory                         network-admin

or do i put it in like this -

cisco-av-pair=shell:roles   mandatory            network-admin

Anyone any ideas ?

Steve

[Tarik Admani]

Steve,

If you are using other policies for ios device then your best bet is to use the second one but set the operator to optional. Mandatory means the = and optional means * when configuring custom attributes through ACS.

Thanks,

Tarik Admani