Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NX5000 NXOS4.1.3 - snmpd: send_trap: Failure in sendto (No route to host)

On my Nexus 5000 NX-OS 4.1.3,  When I exit config, a series of messages are logged as below (term mon). SNMP server is PING able. Wondering why the snmpd is complaining of 'no route to host'.

dcacc.n01(config)#   ctrl-Z
dcacc.n01# 2010 Feb 24 10:07:10.002 dcacc.n01 %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by ..
2010 Feb 24 10:07:10.007 dcacc.n01 16557]: CLIC-6-EXIT_CONFIG: Configured from 2 by systest
2010 Feb 24 10:07:10.026 dcacc.n01 snmpd: snmpd: send_trap: Failure in sendto (No route to host)
2010 Feb 24 10:07:10.028 dcacc.n01 snmpd: snmpd: send_trap: Failure in sendto (No route to host)
2010 Feb 24 10:07:10.028 dcacc.n01 snmpd: NETWORK- UNREACHABLE

707
Views
0
Helpful
0
Replies