Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Silver

Open port 22 on ACS running 4.1

Can someone let me know how to open port 22 on Cisco ACS server running version 4.1 (I know its an end of support version, trying to get a maintainance window to update it) so that we can SSH into it.Below is the screen shot of the current open ports from appliance status page.

Siddhartha       

Siddhartha
Everyone's tags (6)
1 ACCEPTED SOLUTION

Accepted Solutions

Open port 22 on ACS running 4.1

My apologies, it looks like ssh connectivity was released in ACS 4.2 for remote RDBMS connectivity through ssh:

http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps5338/product_bulletin_c25-453391.html

Relational database management system (RDBMS)  synchronization enhancements: ACS has programmatic interface additions  for downloadable access control list (ACL) synchronization. ACS Solution  Engine now also supports scriptable RDBMS synchronization through a  Secure Shell (SSH) Protocol client.

Sorry for the confusion, it looks like you cannot connect remotely via ssh, you will have to use the serial/console port.

Thanks,

Tarik Admani
*Please rate helpful posts*

Tarik Admani *Please rate helpful posts*
4 REPLIES

Re: Open port 22 on ACS running 4.1

You can only manage the solution engine using console. There aren't many commands available through ssh.

Sent from Cisco Technical Support iPad App

Tarik Admani *Please rate helpful posts*
Silver

Open port 22 on ACS running 4.1

Thats fine, can you let me know how open the port

Siddhartha

Siddhartha

Open port 22 on ACS running 4.1

My apologies, it looks like ssh connectivity was released in ACS 4.2 for remote RDBMS connectivity through ssh:

http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps5338/product_bulletin_c25-453391.html

Relational database management system (RDBMS)  synchronization enhancements: ACS has programmatic interface additions  for downloadable access control list (ACL) synchronization. ACS Solution  Engine now also supports scriptable RDBMS synchronization through a  Secure Shell (SSH) Protocol client.

Sorry for the confusion, it looks like you cannot connect remotely via ssh, you will have to use the serial/console port.

Thanks,

Tarik Admani
*Please rate helpful posts*

Tarik Admani *Please rate helpful posts*
Silver

Open port 22 on ACS running 4.1

Thanks for the response.

Siddhartha

Siddhartha
716
Views
0
Helpful
4
Replies
CreatePlease to create content