01-18-2008 07:04 AM - edited 03-10-2019 03:36 PM
Hi,
I've impelemented the PEAP authentication successfully.
when trying to connect to the network,the station prompt for the username and password just for the first connection,and then it stores that username/password in the registry base.
can I do somthing to make it prompts in each connection?
thanks
01-18-2008 08:44 AM
Here is the link to remove cached username during peap authentication from windows.
http://support.microsoft.com/kb/823731/
This is a windows feature for peap
Regards,
~JG
Do rate helpful posts
01-21-2008 07:39 AM
I've delete the registre entry for EAPoL,But each time connected it re-enable it.
is there another solution that permit to prompt for Login/password for each connection.?
thanks
01-21-2008 02:08 PM
Do you have the "Enable Fast Reconnect" disabled in the Global Authentication Setup?
01-22-2008 06:25 AM
it is disabled
01-22-2008 06:55 AM
FYI.
I am having the same exact issue as ismail884.
However, I am using steelbelted/juniper
radius for PEAP authentication instead of Cisco
ACS. I also have "enable FAST-PEAP" disabled
in steelbelted radius but somehow the credential
still cache on the windows client.
01-22-2008 06:56 AM
steelbelted radius version I am using is
6.x.
CCIE Security
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide