Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PEAP with ACS 5.1

I configured PEAP (EAP-MSCHAPv2) with user on Active Directory on ACS 5.1 and works fine.

I need help to configure the PEAP and EAP-TLS using certificates. My Certification Authority is on Microsoft's Active Directory. Can someone help me? Thank you.

3 REPLIES
Cisco Employee

Re: PEAP with ACS 5.1

Hello,


Here are the documents helping out the configuration of EAP-TLS:

EAP-TLS Version 1.01 Configuration Guide
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a008068d45a.shtml

AACS 5.1 EAP-TLS:
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/eap_pap_phase.html#wp1029217

Please let me know if you have any questions.


HTH


Regards,

JK


Plz rate helpful posts-

~BR Jatin Katyal **Do rate helpful posts**
New Member

Re: PEAP with ACS 5.1

So for the configuration of PEAP, whit ACS 5.1 and Windows 2003 Active Directory, I need this:
1. Configure the external database, Active Directory.
2. Import the certificate file (*.cer)  downloaded from the CA.

¿?

Cisco Employee

Re: PEAP with ACS 5.1

Yes, if you are using external user database then first you need to join/integrate ACS with AD.


Since you are using peap; you can either install the self signed certificate or CA certificate, go through the following link for detailed description on how add certificate.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/admin_config.html#wp1052640

You can follow the below link in order to configure Peap authentication.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/admin_config.html#wp1067000

HTH

Jatin



Do rate helpful posts~

~BR Jatin Katyal **Do rate helpful posts**
1018
Views
0
Helpful
3
Replies
CreatePlease to create content