Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

permit single command from ACS

I need to be able to permit only "show logging" for a specific user group on TACACS. Can anyone tell me if this is possible ? I have tried most privilege levels but still the default for each privilege remains.

regards

1 ACCEPTED SOLUTION

Accepted Solutions

Re: permit single command from ACS

Keith,

You need to setup command authorization on acs. Please checkout this link,

http://cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml

Regards,

~JG

Do rate helpful posts

2 REPLIES

Re: permit single command from ACS

Keith,

You need to setup command authorization on acs. Please checkout this link,

http://cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml

Regards,

~JG

Do rate helpful posts

New Member

Re: permit single command from ACS

jg

many thanks for your assistance - this has sorted the problem for me

111
Views
0
Helpful
2
Replies
CreatePlease login to create content