PIX- AAA Authentication Exclude.

[rpsrekhi3]

I have enabled "aaa authentication exclude" commad statement on PIX (6.3).

This excludes the Hosts for which the Firewall doesnot prompt for authentication.

What is the best way to add more lines into it.Do i have to remove all the commands and then all the old and new commands.I added one host in the list for exclution,but the PIX still prompts for username/password.

aaa authentication exclude https outside x.x.x.x 255.255.255.255 a.b.c.d 255.255.255.255 authserv

aaa authentication exclude http outside x.x.x.x 255.255.255.255 a.b.c.d 255.255.255.255 authserv

aaa authentication exclude tcp/25 1.1.1.1 255.255.255.255 192.168.25.1 255.255.255.255 authserv

aaa authentication exclude tcp/25 1.1.1.2 255.255.255.255 192.168.25.2 255.255.255.255 authserv

[ebreniz]

Remove the old configuration.To exclude a particular source or destination from authentication, authorization, or accounting, try

aaa authentication exclude telnet outside 172.18.124.114 255.255.255.255 99.99.99.3 255.255.255.255 AuthInbound,

aaa authorization exclude telnet outside 172.18.124.114 255.255.255.255 99.99.99.3 255.255.255.255 AuthInbound.Refer URL

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094ea9.shtml#exclude_command